Get Quote 2017-05-05T15:30:23+00:00

FREE COMPLIMENTARY DESIGN/ESTIMATE

Thank you for visiting Concrete-Enhancements. Please use the form below to submit your free complementary design/estimate, appointments, questions, testimonials and comments. Customer feedback is important to us and helps us find better ways to serve you. Thank You!


FAQ

We generally apply our systems on old concrete between 3/32″ to 1/8″. CTI’s systems are thin layered cements which depend on adhesion through the use of modified acrylics.

We generally apply our systems on old concrete between 3/32″ to 1/8″. CTI’s systems are thin layered cements which depend on adhesion through the use of modified acrylics.

The cost of the CTI system is normally 20%-25% less than the cost of removing cement and pouring new and is much better looking and much easier to maintain than the original cement.

An average job will take 1 to 2 days. Larger, more complex jobs may take longer. Clean foot traffic is usually allowed within the same day.

All existing control joints should remain in the surface to allow for expansion and contraction of the original concrete. They are not coated with the CTI system and are masked off. We can, however, work to insure these joints match the rest of the look of the surfaces.

Here is how CTI’s systems compare to other coatings as far as heat retention:

Up to 40 degrees cooler than concrete.
30%-40% cooler than epoxy stone
50% cooler than vinyl or urethane
40%-50% cooler than wood decks
Up to 40% cooler than carpet
50%-60% cooler than terrazzo
40%-50% cooler than tile
20%-30% cooler than brick

Colors of the product and texture chosen will effect the overall temperature of the surface.

Cracks are addressed using our revolutionary “Smart Prep” System.  The Smart Prep system offers a flexible bridge over the cracked area that allows the original concrete to move while not allowing any normal cracking to transmit through the CTi coating.